Title: Experimental Characterization of Mode-II Interlaminar Failure in Geometrically Scaled Stitched Resin-Infused Composites

Authors: Allison White, Andrew Walters, Wayne Huberty, Christopher Bounds, Han-Gyu Kim

DOI: 10.33599/nasampe/s.25.0056

Abstract: This work is focused on investigating the impact of out-of-plane stitches on mode-II interlaminar fracture progression and crack arrestment in stitched resin-infused composites. For the experimental work, end-notched flexure quasi-isotropic specimens were manufactured using ±45 non-crimp carbon-fiber fabrics through a resin-infusion process. Both stitched and unstitched specimen sets were designed for comparison. For a size effect study, the specimens were geometrically scaled with three scaling levels. For global fracture analysis, the fracture energy of the specimen material was analyzed using a compliance calibration method and a size effect theory. For local analysis, separation development was characterized along predicted fracture process zones by analyzing in-plane displacement through the thickness from digital image correlation data. The impact of out-of-plane stitches on separation propagation was analyzed and discussed by comparing the stitched and unstitched cases. This work will contribute to understanding damage propagation and crack arrestment mechanisms in stitched resin-infused composites for high-fidelity damage model development.

References: [1] P. Malnati, J. Sloan, Fast and Faster: Rapid-cure Resins Drive Down Cycle Times. CompositesWorld 2018. https://www.compositesworld.com/articles/fast-and-faster-rapid-cureepoxies-drive-down-cycle-times. [2] H. Mason, Market Report Published on Resin Infusion in Aerospace Manufacturing. CompositesWorld 2023. https://www.compositesworld.com/news/market-report-published-onresin-infusion-in-aerospace-manufacturing-. [3] G. Nehls, NASA Awardees to Develop Sustainable Aviation Composite Tech. CompositesWorld 2023. https://www.compositesworld.com/news/nasa-awardees-to-developsustainable-aviation-composite-tech. [4] R. Young, Hi-Rate Composite Aircraft Manufacturing. NASA Technical Report Server. https://ntrs.nasa.gov/api/citations/20230006156/downloads/HiCAM%20Overview%20April_202 3.pdf [5] C. Chen, A. Poursartip, G. Fernlund, Effect of Fast Cure Cycles on Mode I and Mode II Interlaminar Fracture Toughness for Interlayer Toughened Prepreg Composites. SAMPE Virtual Conference Proceedings, 2020. doi 10.33599/nasampe/s.20.0016. [6] C. Hunt, J. Kratz, I.K. Partridge, Cure Path Dependency of Mode I Fracture Toughness in Thermoplastic Particle Interleaf Toughened Prepreg Laminates. Compos Part A Appl Sci Manuf 2016;87:109–14. doi:10.1016/j.compositesa.2016.04.016. [7] D. Incerti, T. Wang, D. Carolan, A. Fergusson, Curing Rate Effects on the Toughness of Epoxy Polymers. Polymer (Guildf) 2018;159:116–23. doi:10.1016/j.polymer.2018.11.008. [8] Hexcel. HiMax® Multiaxial Reinforcements Overview Brochure. Hexcel 2022. [9] ISO 4410. Test Methods for the Experimental Characterization of In-Plane Permeability of Fibrous Reinforcements for Liquid Composite Moulding. ISO 2023: 1-44. [10] S. Sharma, D. Siginer, Permeability measurement methods in porous media of fiber reinforced composites. Applied Mechanics Reviews. 2010 63 (2), pp 20802-1-19, ASME. [11] Y. Lai, B. Khomami, J.L. Kardos, Accurate Permeability Characterization of Preforms Used in Polymer Matrix Composite Fabrication Processes. Polymer Composites, 18(3), 1997. [12] J. Weiztenböck, R.A. Shenoi, P.A. Wilson. Measurement of Three-Dimensional Permeability. Composites Part A, 29(1), 1998. [13] J. Bréard, Y. Henzel, F. Trochu, R. Gauvin. Analysis of Dynamic Flows Through Porous Media. Part I: Comparison Between Saturated and Unsaturated Flows in Fibrous Reinforcements. Polymer Composites 24(3), 2003. [14] C.H. Park, L. Woo. Modeling Void Formation and Unsaturated flow in liquid composite molding processes: a survey and review. Journal of Reinforced Plastics and Composites 30(11), 2011. doi: 10.1177/0731684411411338 [15] K.J. Ahn, J.C. Seferis, J.C. Berg. Simultaneous measurement of permeability and capillary pressure of thermosetting matrices in woven fabric reinforcements. Polymer Composites 12(3), 1991. [16] S.K. Kim, I.M. Daniel. Observation of permeability dependence on flow rate and implications for liquid composite molding. Journal of Composite Materials 41, 2007. [17] T.S. Lundström, Measurement of void collapse during resin transfer moulding. Composites: Part A 28A, 1997. [18] W. Brouwer, E.C.F.C. van Herpt, M. Labordus, Vacuum injection moulding for large structural applications. Composites Part A 34, 2003. [19] A. George, P. Hannibal, M. Morgan, et al. Compressibility measurement of composite reinforcements for flow simulation of vacuum infusion. Polymer Composites 40(3), 2019. [20] A. Yong, A. Aktas, D. May, et al. Experimental characterisation of textile compaction response: a benchmark exercise. Composites Part A 142, 2021. [21] J.M. Castro, C.W. Macosko, Studies of mold filling and curing in the reaction injection molding process. AIChE Journal, 28(2): p. 250- 260, 1982. Copyright 2025 by Hexcel Corporation. Used by the Society of the Advancement of Material and Process Engineering with permission. [22] L. Khoun. Process-induced stress and deformations in woven composites manufactured by resin transfer moulding, PhD Thesis, Department of Mechanical Engineering, McGill University, Montreal, Quebec, Canada, 2009.

Conference: SAMPE 2025

Publication Date: 2025/05/19

SKU: TP25-0000000056

Pages: 19

Price: $38.00