Title: Is Automated Fiber Placement Truly Free from Defects in the Era of Industry 4.0?

Authors: Sai Krishna Meka, Ryan Enos, Yao Sun, Dianyun Zhang

DOI: 10.33599/nasampe/s.25.0198

Abstract: Automated Fiber Placement (AFP) plays a significant role in advanced manufacturing, particularly in the aerospace and automotive industries. AFP technology is of benefit as it enables us to generate layups, based on optimum designs by fiber steering. The primary benefit of AFP is the lower cost through scrap reduction and improved production cycle time as opposed to hand layup methods. However, just as hand layup, AFP also suffers from inherent unintended imperfections. These imperfections could be due to multiple reasons, often the layup imperfections such as gaps and overlaps are studied but enough emphasis is not provided on the defects due to consolidation/curing. Optimized cure cycles are utilized to minimize residual stresses developed during curing, which could affect the mechanical performance of the composites. A continuum-based damage model called the “smeared crack approach” is used to conduct a progressive damage analysis on AFP fabricated coupons where the layup imperfections and consolidation defects are considered simultaneously.

References: [1] B. S. Mustafa, G. M. Jamal and O. G. Abdullah, "Improving the tensile, toughness, and flexural properties of epoxy resin based nanocomposites filled with ZrO2 and Y2O3 nanoparticles," Results in Physics, https://doi.org/10.1016/j.rinp.2022.105662. vol. 38, 2022, [2] B. Ellis, Chemistry and Technology of Epoxy Resins, Netherlands: Springer Science & Business Media, 1993, https://doi.org/10.1007/978-94-011-2932-9_1. [3] R. Dagani, "Putting the 'nano' into composites," Chemical & Engineering News (C&EN), vol. 77, no. 23, p. 25–37, June 7, 1999, https://doi.org/10.1021/cen-v077n023.p025. [4] N. Chisholm, H. Mahfuz, V. K. Rangari, A. Ashfaq and S. Jeelani, "Fabrication and Mechanical Characterization of Carbon/SiC-Epoxy Nanocomposites," Composite Structures, vol. 67, no. 1, pp. 115-124, January https://doi.org/10.1016/j.compstruct.2004.01.010. 2005, [5] S. Hlangothi, I. Krupa, V. Djoković and A. Luyt, "Thermal and mechanical properties of cross-linked and uncross-linked linear low-density polyethylene–wax blends," Polymer Degradation and Stability, vol. 79, no. 1, p. 53–59, 2003, https://doi.org/10.1016/S01413910(02)00238-0. [6] A. Teishev, S. Incardona, C. Migliaresi and G. Marom, "Polyethylene fibers–polyethylene matrix composites: Preparation and physical properties," Journal of Applied Polymer Science, vol. 50, no. 3, p. 503–512, October 15, 1993, https://doi.org/10.1002/app.1993.070500314. [7] S. Halder, M. Goyat and P. Ghosh, "Morphological, Structural, and Thermophysical Properties of Zirconium Dioxide–Epoxy Nanocomposites," High Performance Polymers, vol. 27, no. 8, p. 1013–1025, 2015, https://doi.org/10.1177/0954008315595275. [8] N. A. Hussein and S. I. Hussein, "Enhanced thermal expansion, mechanical properties, and adhesion analysis of epoxy/ZrO₂ nanocomposites," Journal of Physics: Conference Series, Copyright 2025. Used by the Society of the Advancement of Material and Process Engineering with permission. SAMPE Conference Proceedings. Indianapolis, IN, May 19-22, 2025. Society for the Advancement of Material and Process Engineering – North America. vol. 1279, 2019, https://dx.doi.org/10.1088/1742-6596/1279/1/012026. [9] C. Wang, X. Xin, N. Zhang, Y. Jiao, Z. Chi, Y. Wang and M. Liang, "Effect of Curing Agent Type on Curing Reaction Kinetics of Epoxy Resin," Advances in Transdisciplinary Engineering, vol. 38, p. 981–989, 2023, https://ebooks.iospress.nl/doi/10.3233/ATDE230384. [10] N. F. Ariffin, M. W. Hussin, A. R. M. Sam, L. N. H. A. Khalid and S. &. K. N. H. A. S. Lim, "Degree of Hardening of Epoxy-Modified Mortars without Hardener in Tropical Climate Curing Regime," Advanced Materials Research, vol. 1113, p. 28–35, 2015, DOI: 10.4028/www.scientific.net/AMR.1113.28. [11] M. B. Bever, "Encyclopedia of Materials Science and Engineering," in Pergamon Press and MIT Press, 1986, DOI: 10.1557/S0883769400066008. [12] "Countertop Epoxy," [Online]. Available: https://www.countertopepoxy.com/premiumclear-epoxy-for-countertops-bar-tops/. [Accessed 20 january 2025]. [13] "Sigma-Aldrich (Merck)," [Online]. Available: https://www.sigmaaldrich.com/BD/en. [Accessed 18 january 2025]. [14] A. International, "ASTM D638-10: Standard Test Method for Tensile Properties of Plastics," 2010. [Online]. Available: https://www.astm.org/, DOI: 10.1520/D0638-10. [15] A. International, "ASTM D790-17: Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials," 2017. [Online]. Available: https://www.astm.org/, DOI: 10.1520/D0790-17. [16] A. International, "ASTM D6110-08: Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics," 2008. [Online]. Available: https://www.astm.org/, DOI: 10.1520/D6110-18. [17] M. Abutalib and A. Rajeh, "Enhanced structural, electrical, mechanical properties and antibacterial activity of Cs/PEO doped mixed nanoparticles (Ag/TiO₂) for food packaging applications," Polymer Testing, vol. 93, 2021, https://doi.org/10.1016/j.polymertesting.2020.107013. [18] V. T. Nguyen, A. S. Vaughan and P. L. Lewin, "The effect of resin stoichiometry and nanoparticle addition on epoxy/silica nanodielectrics," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 22, no. 2, pp. 895-905, 2015, https://doi.org/10.1109/TDEI.2015.7076790. [19] H. Dodiuk and S. H. Goodman, Handbook of Thermoset Plastics (Third Edition), Elsevier, 2014, https://doi.org/10.1016/C2011-0-07528-5. [20] M. M. Rahman, S. Zainuddin, M. V. Hosur, C. J. Robertson, A. Kumar, J. Trovillion and S. Jeelani, "Effect of NH₂-MWCNTs on crosslink density of epoxy matrix and ILSS properties of e-glass/epoxy composites," Composite Structures, vol. 95, pp. 213-221, 2013, https://doi.org/10.1016/j.compstruct.2012.07.019

Conference: SAMPE 2025

Publication Date: 2025/05/19

SKU: TP25-0000000198

Pages: 15

Price: $30.00